Engineer II

Overview

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!

Duties and Responsibilities Establish process for manufacturing and create work instruction for assembly in MES System.

Evaluate manufacturing process and create process control plan, PFMEA and Risk assessment.

Must comply to POR and CE! Compliance.

Work with Manufacturing, Engineering, Quality department to drive Continuous improvement on quality, efficiency and manufacturing cycle time.

Initiate and support Design for Excellence and manufacturing process improvement / standardization.

Engage with IE to optimize layout and product layout floor for new and existing plants

Implement Lean line using DFT concept with relevant Jig and Fixture.

Technical solve and support for trouble shooting issue, quality issue, first pass yield issue

Participate in product transfer : Coordinate the team for training, understand the equipment, facility requirement, build and test requirements)

Liaise and coordinate with Engineering and Material department on spec, BOM and material changes / issues

Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.

Liaise and coordinate with Test Engineering department on testing development or testing issue

Liaise with customer for all BOM / drawing / design issue by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.

Involve in MRB (Material Review Board) meeting, make justifiable disposition, analyst data and work with relevant departments / suppliers to reduce non-conformance.

Minimum CAD knowledge to analyst 3D drawing from customer.

Initiate Engineering change and waiver for any change required.

Working in ERP System for engineering master control and change.

Establish test process for manufacturing and create work instruction for test in MES System. And provide detailed training to all test technicians.

Evaluate test process and create test Process control, PFMEA and Risk assessment.

Must comply with POR and CE! Compliance.

Define the FPY failure category and defects, collect data’s, analysis and identify the gaps

Work with Production, Manufacturing engineers and Supplier quality engineers, drive by effective actions to fix the failures with permanent solutions.

Drive for continuous improvement on quality, efficiency and test cycle time.

Maintain the test fixtures by schedule frequent equipment preventive maintenance, critical parts control.

Develop troubleshooting guides for test technicians

Participate in new product transfer by coordinate the team for training, understand the equipment, facility requirement, build and test requirements

Coordinate with Engineering and Material department on spec, BOM and material changes / issues

In-depth knowledge required on parts level drawings and schematics to perform component level troubleshooting

Liaise and coordinate with Quality department on Supplier quality and Customer quality issue including RCCA, 8D preparation.

Work with Customer for all BOM / drawing / design issue related to test by generating problem report / supplier problem sheet / Supplier request deviation with single page summary.

Monitor and improve on the qualified process using SPC and other statistical tools.

Drive functional excellence of the production engineering team.

Drive continuous improvement activities in quality, cycle times, process improvement, machine availability through lean techniques and value engineering to enhance the capability of existing processes and remove waste.

Develop, implement and manage key performance indicators (KPIs) for each area of responsibility.

Ensure KPIs were met by working to the overall plan, including management of, and reporting.

Conduct risk assessments of processes and tasks in the department.

Motivate and coach the team to operational success

Monitor the completion of tasks and ensure good performance and record on appropriate systems

Consistently promote high standards through personal example and roll out through the team so that each member of the team understands the standards and behaviors expected of them

Review, implement and update company records e.g. training matrices, performance reviews, risk assessments

Lead the team in new product and process introduction

Set department objectives / KPIs and review and assess ongoing performance of direct reports

Communicate KPIs from the strategic annual plan so that each employee is aware

Report on achievement of targets and identify any actions required

Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance

Work collaboratively, negotiate and engage with key stakeholders to facilitate delivery and compliance with the manufacturing strategy

Communicate with stakeholders the impact of market change and potential effects on manufacturing design and development. Recommend solutions without compromising quality or service while optimizing cost

Stay current and up to date on any technology changes that may affect manufacturing design and development and advise others of any impact.

Ensure an effective interface with other departmental staff is maintained

Knowledge, Skills, Experience Minimum 3-year relevant experience (5 years for diploma holder)

Exposure to semiconductor industry preferred.

Experience on setting up lean line will be very important

Know and able to explore full BOM structure (more than 1,000 line) is needed.

Self-motivated and resourceful

Possesses drive with “can-do” attitude

Capable of developing positive work relationship, a favourable work environment within the team and other functional group

Must able to perform and demonstrate good workmanship understanding according to industrial standard.

Good interpersonal, communication and presentation skill.

Able to perform any other task assigned by manager / supervisor.

Comply to work ethics and integrity.

Understanding the concepts of pressure, vacuum and leak detector.

Familiarity with control systems utilized in industrial production and process automation, industrial standards for Safety and compliance, and serial communication protocols

Must be able to perform component level troubleshooting

Excellent problem solving, debugging skills, investigative minds and paying attention

Good knowledge of electrical theories, wiring and routing

Strong verbal and written communication and presentation skills

Candidate with Six Sigma Knowledge is a plus

Education, Certifications, Requirements Bachelor’s Degree in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering.

Diploma in Mechanical / Electrical / Electronics / Mechatronics / Industrial Systems Engineering with minimum 5 years working experience in related field can apply.

Location

Malaysia

Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, pregnancy, political affiliation, union membership, covered veteran status, protected genetic information and any other characteristic protected under laws and regulations.

#J-18808-Ljbffr