Talent.com
This job offer is not available in your country.
QC Inspector (Seksyen 15)

QC Inspector (Seksyen 15)

Micron Concept AerostructuresShah Alam, Selangor, Malaysia
25 days ago
Job description

Company : Micron Concept Aerostructures Sdn Bhd

Type : Full time

Category : Manufacturing QA-Quality Control

Job Description

  • Performs visual and mechanical inspections on products based on the required characteristic
  • Support quality inspections activities needed across the manufacturing (IPQC, OQA, first piece, Last piece,
  • Carry out configuration verification by carry out document check on Supplier CoC, Mill Cert, Internal Manufacturing
  • Order, Internal CoC etc to ensure product are manufactured as per the required specification and requirement
  • Carry out product preservation & Identification (Packaging, Labeling, tagging, part protection etc ) to ensure part are properly protected and identified for traceability purposes
  • Support Quality Engineers in inspection data collection, document generation and FAI dimensional reporting
  • Performs other duties as assigned by superiors
  • Quality inspection report generation and ensure data accuracy
  • Evaluate non-conformance issue and highlight and feedback to superior
  • Ensure applicable manufacturing document completeness
  • Release inspected parts for FG storage and delivery purposes
  • Assist and support quality and engineering during first article inspection & prototype run
  • Ensure workplace cleanliness, FOD and overall 6S in workstation
  • Ensure proper fill up of quality record and correct use of company issued stamp as per defined procedure
  • Work closely with departmental lead to ensure departmental KPI, company policy , EHS policy, and Quality objective can be met
  • Ensure QC output and efficiency
  • Support in overall company improvement activities
  • Ensure proper ERP data update / job check in / out
  • CMM programming control and change control
  • Report any Nonconformity / Observation on system, product quality to HOD or immediate superior for immediate action.
  • Authorized to trigger production and shipment stop with justification part produced might not meeting the requirement and the need for further confirmation as part of the product assurance activities. Immediate report to superior for immediate resolution.
  • May appointed as organization HIC (High Impact Committee) team member in coordinating and involving in organization 6S, FOD and EHS matter
  • Ensure equipment used in ensure product conformity are calibrated and valid to be used.
  • Ensure correct and proper use of QC stamp per organization stamp and signatory control procedure.

Job Requirement :

  • Must possess at least a diploma in mechanical engineering or equivalent
  • At least 1 years working experience in manufacturing / engineering field
  • Technical Drawing & measurement tool understanding
  • Computer literate and able to work independently
  • Good command in written and spoken English
  • Good Leadership skill
  • Self motivated with good interpersonal and analytical skills
  • Must have experience in performing engineering mechanical inspection
  • Experience in CMM is a plus
  • Job Types : Full-time, Permanent

  • Medical Claim
  • Health insurance
  • Opportunities for promotion
  • Schedule :
  • Day shift
  • Monday to Friday
  • Night shift
  • Supplemental Pay :

  • Attendance Allowance
  • Overtime pay
  • Performance bonus
  • Ability to commute / relocate :

  • Shah Alam : Reliably commute or planning to relocate before starting work (Required)
  • #J-18808-Ljbffr

    Create a job alert for this search

    Qc Inspector • Shah Alam, Selangor, Malaysia

    Related jobs
    • Promoted
    Head of Quality Assurance

    Head of Quality Assurance

    Malaysian Genomics Resource CentreSelangorMalaysia, Selangor, Malaysia
    Establish, implement, and maintain the Pharmaceutical Quality System (PQS) and quality management systems (QMS) as adopted by the company. Ensure that cell productions and quality operations comply ...Show moreLast updated: 2 days ago
    • Promoted
    QC Inspector

    QC Inspector

    SDMK PRECISION ENGINEERING SDN BHD (JB)SelangorMalaysia, Selangor, Malaysia
    Determining inspection protocols, define sampling procedures and determining equipment and mechanisms to be used in the inspection process. Perform the daily task assigned by the QC supervisor and / o...Show moreLast updated: 22 days ago
    • Promoted
    QC INSPECTOR

    QC INSPECTOR

    Siraga IEMPort Klang, Selangor, Malaysia
    We are seeking a diligent and meticulous QC Inspector to join our team at SIRAGA IEM SDN BHD in Port Klang, Selangor.As a full-time QC Inspector, you will play a crucial role in ensuring the qualit...Show moreLast updated: 2 days ago
    • Promoted
    QC Inspector

    QC Inspector

    Advanced Network SolutionsSelangorMalaysia, Selangor, Malaysia
    The QC Inspector is responsible for ensuring that all telecommunications products, components, and materials meet the company’s quality standards and customer specifications.This role involves perf...Show moreLast updated: 24 days ago
    • Promoted
    Quality Inspector (1 year Contract)

    Quality Inspector (1 year Contract)

    Malton BerhadKuala Lumpur, Kuala Lumpur, Malaysia
    Promote and implement the Company’s Quality Management System (QMS) to project(s) and department(s).Conduct & report implementation plan for the QLASSIC throughout project lifecycle.Enforcement of ...Show moreLast updated: 2 days ago
    • Promoted
    Head of Quality Assurance

    Head of Quality Assurance

    Malaysian Genomics Resource Centre BerhadPetaling Jaya, Selangor, Malaysia
    Establish, implement, and maintain the Pharmaceutical Quality System (PQS) and quality management systems (QMS) as adopted by the company. Ensure that cell productions and quality operations comply ...Show moreLast updated: 2 days ago
    • Promoted
    Quality Specialist

    Quality Specialist

    YETI Canada LimitedKuala Lumpur, Kuala Lumpur, Malaysia
    Quality Specialist page is loaded## Quality Specialistlocations : Kuala Lumpur, Malaysiatime type : Full timeposted on : Posted Todayjob requisition id : JR At YETI, we believe that time spent ...Show moreLast updated: 18 days ago
    • Promoted
    QC Inspector

    QC Inspector

    Eastern PretechBeranang, Selangor, Malaysia
    To carry-out pre and post inspection, which include mould preparation, reinforcement arrangement, accessories and cast-in item, dimensional and appearance condition based on issued drawing.To ensur...Show moreLast updated: 24 days ago
    • Promoted
    Quality Technician - JB

    Quality Technician - JB

    Beyondsoft SingaporeKuala Lumpur, Kuala Lumpur, Malaysia
    We are seeking a Quality Technician to perform quality inspection on electromechanical components and finished products.Perform quality inspection on electromechanical components and finished produ...Show moreLast updated: 10 days ago
    • Promoted
    Quality Inspector (Hardlines / EE)

    Quality Inspector (Hardlines / EE)

    QIMA Hong KongShah Alam, Selangor, Malaysia
    This is a freelance position open for candidate who are based in Cebu.At QIMA, we’re on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retai...Show moreLast updated: 1 day ago
    • Promoted
    Quality Inspector

    Quality Inspector

    HICOM HBPOSelangorMalaysia, Selangor, Malaysia
    Add expected salary to your profile for insights.To perform inspection of purchased parts, subassemblies or finished products according to well defined criteria using standard physical, mechanical ...Show moreLast updated: 2 days ago
    • Promoted
    QC Inspector

    QC Inspector

    CS Yap Engineering Sdn BhdHulu Kelang, Selangor, Malaysia
    QC Inspector role at CS Yap Engineering Sdn Bhd.Perform incoming, in-process, and final inspections on products and materials. Conduct tests using measuring instruments such as calipers, micrometers...Show moreLast updated: 30+ days ago
    • Promoted
    QC Inspector

    QC Inspector

    Kinetics PlaySelangorMalaysia, Selangor, Malaysia
    Conduct QC inspection and records of incoming, work in process and finished products quality in accordance to product specifications (Checklist). Prepare QC inspection, follow up and report of the r...Show moreLast updated: 2 days ago
    • Promoted
    Quality Inspector

    Quality Inspector

    QIMASelangorMalaysia, Selangor, Malaysia
    At QIMA, we’re on a mission to help our clients make products consumers can trust.Working with over 30,000 global brands, retailers, manufacturers and food growers, we are on the ground wherever pr...Show moreLast updated: 5 days ago
    • Promoted
    Quality Inspector (Hardlines / EE)

    Quality Inspector (Hardlines / EE)

    QIMAShah Alam, Selangor, Malaysia
    This is a freelance position open for candidates based in Cebu.At QIMA, we’re on a mission to help our clients make products consumers can trust. Working with over 30,000 global brands, retailers, m...Show moreLast updated: 1 day ago
    • Promoted
    Quality Lead (PCBA)

    Quality Lead (PCBA)

    Michael PageKuala Selangor, Kuala Selangor, Malaysia
    Growing company with huge market shares.Technically sound management team.Our client is a well-established organization within the manufacturing industry. As a mid-sized company, they are known for ...Show moreLast updated: 2 days ago
    • Promoted
    QC Inspector

    QC Inspector

    Prestar Marketing Sdn. Bhd.Rawang, Selangor, Malaysia
    Our approach to human resource management is predicated on our belief in the need to nurture the talents and optimise the potential of our employees. To this end, our strategy is to create an infras...Show moreLast updated: 25 days ago
    • Promoted
    Product Safety & Quality Lead

    Product Safety & Quality Lead

    BusinesslistKuala Selangor, Kuala Selangor, Malaysia
    Develop and implement product safety and quality assurance processes.Conduct regular audits to ensure compliance with regulatory and company standards. Collaborate with cross-functional teams to add...Show moreLast updated: 30+ days ago