HT Substation Design Manager

The role of Substation Design Engineer requires the experience in developing 275kV, 132kV, 33kV and 11kV substation electrical design, interconnection with power grid, primary and secondary equipment selection, SCADA and testing & commissioning standards to meet reliability and availability requirement, international best practices, regulatory requirement, safety in design, cost target and speed to market.

Responsibilities

The Engineer must have practical experience and well verse with Grid Code, Bulk Supply Interconnection Standards, Metering standards, Substation Design Standards in Malaysia.

The Engineer should have design experience with HT & MV Substation layout planning, Interconnection with Overhead Transmission Pylon, HT Cable path planning, Power Transformer design (multiple windings, OLTC steps, vector group, winding impedance), Earthing Transformer, AIS and GIS HT switchgears, Double busbar design, Busbar Differential Protection, Distance Protection, Transformer Biased Differential Protection, Fault analysis calculation, Underground cable temperature rise simulation (CYME or equivalent). Internation design standard such as IEC 61850, IEC 60076, IEC 62271, IEC 61439 will be used extensively.

The design developed by the Engineer must be concurrently maintainable, meet five nines availability, achieve fault grading and arc flash protection requirement, sized for the worst case power demand, and never exceed electrical and thermal capacity of conductor and equipment.

The Engineer should be well verse with Renewable Energy Policy and regulatory framework in Malaysia and South East Asia so that the design can tally with the policy roadmap and requirement, this includes Demand Side Management and Interruptible Load Programmes, Energy Storage Systems, Micro-Grid, Combined Cycle Power Plant and Cogeneration.

Qualification

Electrical Professional Engineer with practicing certificate.

10+ years in design consultancy.

Experience in electrical studies – load flow, short circuit, arc flash, Neher McGrath, load calculation, lightning protection, earthing, electrical system protection, electrical power monitoring system, building management system.

Experience in hyper scale datacenter, micro-electronics or other critical infrastructure is preferred.

Proficient in English and Mandarin to effectively communicate with Mandarin-speaking clients.

Proficient in AutoCAD, Etarp, SKM, CYME tool for design and drafting.

Travelling is required to oversee substation construction.

Willing to be relocated based on project requirement.

#J-18808-Ljbffr