Talent.com
Tawaran kerja ini tidak tersedia di negara anda.
Process & Equipment Technicians

Process & Equipment Technicians

Robert Bosch GroupSeberang Perai, Penang, Malaysia
30+ hari lalu
Penerangan pekerjaan

Company Description

Bosch in Malaysia is a part of the Bosch Group, a leading global supplier of technology and services. The Bosch Group’s strategic objective is to deliver innovations for a connected life. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life”. Bosch has been present in Malaysia since 1923, represented by Robert Bosch Sdn Bhd. In Malaysia, Bosch is active in four business sectors : Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology.

The company has three manufacturing sites and research and development offices in Penang, producing automotive electronics, power tools and steering systems, and now a fourth plant with a final testing centre for sensors and semiconductors.

PgP5 Plant is Bosch Group’s newest expansion in Malaysia a semiconductor test site in Batu Kawan Penang. The construction has begun in May 2021 and first series of production commenced in 2023. With the long-term forecasts for growth of semiconductor component quantities, coupled with the front-end production in Bosch’s Dresden facility in Germany, capacity expansion is required for the back-end production, which is the final testing phase of semiconductors and sensors. PgP5 will primarily focus on the final testing of components manufactured at Bosch Automotive Electronics’ fab in Dresden, Germany. The plant will also house R&D and training facilities.

Job Description

Job Overview

  • To support operators in manufacturing products are tested in right quality, quantity based in the standardized work
  • To fix minor technical issues at the manufacturing tools during the shifts
  • To perform tool changeovers during the shifts, whenever products to be manufactured are changing
  • If no troubleshooting on shift is successful, to prepare required information and document it for the engineers at day shift, so that they can start additional troubleshooting

Job Description

  • Trigger engineers in the event of non-conformities are found.
  • Perform conversion inspection check according to the work instruction.
  • Performing change over at the tools.
  • Perform 5S for individual workstation.
  • Carry out production check list for every shift.
  • Participate in Production Suggestion System (PSS).
  • Compulsory to understand and follow ESD procedure.
  • Check required poka-yoke and give information to engineers.
  • Contributing in the Systematic Continuous Improvement Process (S-CIP)
  • In case of known deviation, perform technical problem solving.
  • Support and advice the operators in running the manufacturing tools possibly without interruptions
  • Qualifications

  • At least 1 to 2 years of working experience in the manufacturing environment in production environment
  • Diploma qualification is a must, preferably in Electrical & Electronics or Semiconductors production
  • Able to work as a team with good teamwork and maintain a healthy working environment
  • Able to communicate in cross functional way
  • Able to contribute the new idea for floor improvement
  • Knowledge in BPS tools, Poka-Yoke & Standardized work is an added advantage
  • Additional Information

  • Benefits : Company Insurances, Transport Allowance, Flexi Work hours, Car Loan Subsidy, Meal Subsidy, High EPF, etc.
  • #J-18808-Ljbffr

    Buat amaran kerja untuk carian ini

    Equipment Technician • Seberang Perai, Penang, Malaysia

    Pekerjaan yang berkaitan
    • Dinaikkan pangkat
    Tooling Technician

    Tooling Technician

    ValeoGeorge Town, Penang, Malaysia
    Join or sign in to find your next job.Be among the first 25 applicants.Get AI-powered advice on this job and more exclusive features. Carry out preventive maintenance operations and scheduled machin...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Equipment Technician (Layer Attach)

    Equipment Technician (Layer Attach)

    Ams OsramBayan Lepas, Penang, Malaysia
    Maintaining and sustaining job on variety equipment to control downtime.Perform machine conversion, tool change & PM to support production. Must do shift work and support overtimes (OT) as required....Tunjukkan lagiKemas kini terakhir: 3 hari yang lalu
    • Dinaikkan pangkat
    Equipment Technician

    Equipment Technician

    Micron TechnologyBatu Kawan, Penang, Malaysia
    Our vision is to transform how the world uses information to enrich life for all.Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Manual milling machinist

    Manual milling machinist

    HY INDUSTRY ENTERPRISEPermatang Pauh, Penang, Malaysia
    The Manual Milling Machine Operator is responsible for operating conventional milling machines to perform machining tasks according to engineering drawings and specifications.This role requires pre...Tunjukkan lagiKemas kini terakhir: 26 hari yang lalu
    • Dinaikkan pangkat
    Tooling Technician

    Tooling Technician

    TeleflexKulim, Kedah, Malaysia
    Teleflex is a global provider of medical technologies focused on improving health and quality of life.Teleflex offers a diverse portfolio across anesthesia, emergency medicine, interventional cardi...Tunjukkan lagiKemas kini terakhir: 28 hari yang lalu
    • Dinaikkan pangkat
    Technician 4, Manufacturing Equipment

    Technician 4, Manufacturing Equipment

    SandiskBatu Kawan, Penang, Malaysia
    Responsible for improving and sustain engineering portion and meet the KPI (Availability, OEE, Maintain UPH and Yield).Perform line troubleshooting and supporting daily production operation.Analyze...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Equipment Technician

    Equipment Technician

    FairworkPenangMalaysia, Penang, Malaysia
    Provide technical support and assist with equipment handling, setup, and testing.Liaise with equipment vendor technical teams to ensure alignment on project requirements and integration points.Over...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Technician 3, Manufacturing Equipment (KGD)

    Technician 3, Manufacturing Equipment (KGD)

    SandiskBatu Kawan, Penang, Malaysia
    Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today’s needs and tomorrow’s next big ideas. With a rich history of groundbre...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Technician 3, Manufacturing Equipment

    Technician 3, Manufacturing Equipment

    SandiskBatu Kawan, Penang, Malaysia
    Sandisk understands how people and businesses consume data and relentlessly innovate to deliver solutions that enable today’s needs and tomorrow’s next big ideas. With a history of groundbreaking in...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Technician 2, Manufacturing Equipment

    Technician 2, Manufacturing Equipment

    SandiskBatu Kawan, Penang, Malaysia
    Be among the first 25 applicants.Get AI-powered advice on this job and more exclusive features.Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver sol...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Milling Machinist

    Milling Machinist

    KOEI ToolSeberang Perai, Penang, Malaysia
    Salary match Number of applicants Skills match.Manufacturing, Transport & Logistics 11-50 employees.Our experience of manufactualing Plastic injection mold is over 35 years.We can complete process ...Tunjukkan lagiKemas kini terakhir: 4 hari yang lalu
    • Dinaikkan pangkat
    CNC Machinist

    CNC Machinist

    APRPMSeberang Perai, Penang, Malaysia
    This company is a portfolio medical technology business focused on the repair, regeneration and replacement of soft and hard tissue. Development opportunities working with industry experts.Opportuni...Tunjukkan lagiKemas kini terakhir: 16 hari yang lalu
    • Dinaikkan pangkat
    TOOLING TECHNICIAN

    TOOLING TECHNICIAN

    AKT ComponentsGeorge Town, Penang, Malaysia
    Prepare, setup and issue tooling required for machining operations (CNC Milling and CNC Turning).Maintain and monitor tooling inventory, ensuring availability and proper storage.Inspect, sharpen, r...Tunjukkan lagiKemas kini terakhir: 1 hari yang lalu
    • Dinaikkan pangkat
    Junior Equipment Technician

    Junior Equipment Technician

    Ams OsramBayan Lepas, Penang, Malaysia
    Knowledge and hand on experience on Die Attach Machine especially DA Brand ASMPT- Operation.Knowledge and hand on experience on Die Attach Machine especially DA Brand ASMPT Setup / Conversion.Know...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Technician 5, Manufacturing Equipment

    Technician 5, Manufacturing Equipment

    SandiskSeberang Perai, Penang, Malaysia
    Be responsible for Wafer sort equipment day to day line sustaining, prober card maintenance, PM and conversion.Able to hands on and provide systematic problem analysis. Ability to troubleshoot, anal...Tunjukkan lagiKemas kini terakhir: 1 hari yang lalu
    • Dinaikkan pangkat
    Production Technician

    Production Technician

    AT & S Austria Technologie & Systemtechnik AktiengesellschaftKulim, Kedah, Malaysia
    AT&S, a world leading high-tech PCB & IC Substrates Company, with production plants in Austria, China, India, Korea; and Sales Support Offices around the globe, is building its first production sit...Tunjukkan lagiKemas kini terakhir: 23 hari yang lalu
    • Dinaikkan pangkat
    CNC Machinist (Milling / Turning)

    CNC Machinist (Milling / Turning)

    Penang Skills Development CentrePenangMalaysia, Penang, Malaysia
    CNC Machinist (Milling / Turning).Ability to read drawings & knowledge of GD&T.Ability to operate inspection equipment.At least 2 years of CNC experience. Fresh graduates are encouraged to apply.Int...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu
    • Dinaikkan pangkat
    Module Equipment Technician

    Module Equipment Technician

    Intel CorporationGeorge Town, Penang, Malaysia
    Module Equipment Technician role at Intel Corporation.Strong technical aptitude and problem-solving skills.Ability to work with precision instruments and equipment. Basic understanding of mechanical...Tunjukkan lagiKemas kini terakhir: 30+ hari yang lalu