Manufacturing EngineerBoston Scientific Gruppe • PenangMalaysia, Penang, Malaysia

Manufacturing Engineer

Boston Scientific Gruppe • PenangMalaysia, Penang, Malaysia

3 hari lalu

Penerangan pekerjaan

Demonstrates basic technical expertise on process / product technologies to support design, optimization, validation and troubleshooting of those technologies.

Under supervisory direction, provides input to Equipment engineering or external equipment / tooling or material vendors in the selection, design & development of new (or upgrades to existing) equipment, tooling and materials.

Demonstrates good working knowledge of DFSS / DMAIC tools and, with mentor assistance, applies these tools in the characterization, optimization and troubleshooting of process equipment and technology performance.

Supports the development and execution of experimentation and testing to enable characterisation, optimization and troubleshooting of processes and equipment and summarizes, analyzes and draws conclusions from test results leading to effective technical resolution.

Supports the introduction of new processes, equipment and materials including installation, calibration, EHS assessment debug, and all associated process and quality system documentation requirements including technical and process work instructions.

With mentor assistance demonstrates good working knowledge and application of Lean methodologies, and process improvement tools to assist in identification and elimination of "waste" process steps and development of efficient, cost effective equipment and processes.

With mentor assistance demonstrates good working knowledge and application of Process and equipment validation techniques, PFMEA’s, and associated regulatory requirements and applies this knowledge in the support of efficient & timely validation of equipment and processes.

Under supervision supports the writing and release of process validation documentation including FMEA's, Validation Plans, protocols and reports.

Under supervision, supports execution and documentation of validation builds, co-ordinates testing of validation units and compiles, analyzes and reports on the validation results.

With mentor assistance ensures compliance with all the regulations governing the quality systems.

For individual who is assigned calibration engineering role only :

Provide equipment calibration services necessary to meet company objectives, while assuring measurement traceability to nationally recognized equipment calibration standards and practices.

Supporting Technical SME for Calibration group and for internal and external Audit

Competent on Calibration Management System

Perform calibration functions and set day-to-day function for calibration group

Supports the research and acquisition of new standards and other capital equipment, providing detailed justifications and cost analysis as required.

Develops technical engineering reports and calibration procedures and trains department technicians on new calibration procedures.

Provides support and guidance to calibration technicians in performing moderately complex equipment calibrations.

Supports calibration lab needs regarding such issues as environmental control and new technologies.

Supports Senior Metrology Engineer and Management to develop the department fiscal year budgets.

Communicates with the Operations ME function on calibration status.

Build Quality into all aspects of work by maintaining compliance to all quality requirements

Drive “Standard Work” in all aspect of Calibration activity.

Requirements

Minimum Degree in Engineering
3-5 years of experience in manufacturing / process engineering. Prior experience in the medical device industry is preferred.
Required skills : Problem Solving, analytical skill, project management, critical thinking, NPI, people leadership
Experience in product transfer will be added advantage.

About Us

As a global medical technology leader for more than 40 years, our mission at Boston Scientific (NYSE : BSX) is to transform lives through innovative medical solutions that improve the health of patients. If you’re looking to truly make a difference to people both around the world and around the corner, there’s no better place to make it happen.

Job Segment : Medical Device Engineer, Compliance, Manufacturing Engineer, Medical Device, Process Engineer, Engineering, Legal, Healthcare

#J-18808-Ljbffr

Buat amaran kerja untuk carian ini

Manufacturing Engineer • PenangMalaysia, Penang, Malaysia

Pekerjaan berkaitan

Senior Engineer, Test Manufacturing

Celestica Inc. • Kulim, Kedah, Malaysia

Senior Engineer, Test Manufacturing.Performs tasks such as, but not limited to, the following : .Responsible for the transition of new products and processes from engineering to manufacturing and the...Tunjukkan lagi

Kemas kini terakhir: 30+ hari yang lalu • Dinaikkan pangkat

Senior Manufacturing Engineer

WhiteCrow Research • Seberang Perai, Penang, Malaysia

We are global talent research, insight and pipelining specialists with offices in the UK, USA, Singapore, Malaysia, Hong Kong, Dubai, and India. Our international reach has helped us to understand a...Tunjukkan lagi

Kemas kini terakhir: 30+ hari yang lalu • Dinaikkan pangkat

Shift Manufacturing Engineer

Lam Research • Kulim, Kedah, Malaysia

The Global Operations Group brings information systems, facilities, supply chain, logistics, and high-volume manufacturing together to drive the engine of our global business operations.We help Lam...Tunjukkan lagi

Kemas kini terakhir: 30+ hari yang lalu • Dinaikkan pangkat

SR MANUFACTURING ENGINEER

TE Connectivity • PenangMalaysia, Penang, Malaysia

Be among the first 25 applicants.At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world.Leads sma...Tunjukkan lagi

Kemas kini terakhir: 30+ hari yang lalu • Dinaikkan pangkat

Senior Engineer Manufacturing Decision Intelligence

Infineon Technologies • PenangMalaysia, Penang, Malaysia

Senior Engineer Systems Engineering.The 1st and 2nd level operations support for Engineering Based Systems used globally within Infineon. Engineering Based Systems used globally within Infineon.In s...Tunjukkan lagi

Kemas kini terakhir: 6 hari yang lalu • Dinaikkan pangkat

Associate Engineer, Test Manufacturing

Celestica • Kulim, Kedah, Malaysia

Be among the first 25 applicants.Get AI-powered advice on this job and more exclusive features.Associate Engineer, Test Manufacturing. Test Engineering Manufacturing (TEM).The Associate Engineer, Te...Tunjukkan lagi

Kemas kini terakhir: 30+ hari yang lalu • Dinaikkan pangkat

Manufacturing Engineer

Boston Scientific • George Town, Penang, Malaysia

Demonstrates basic technical expertise on process / product technologies to support design, optimization, validation and troubleshooting of those technologies. Under supervisory direction, provides in...Tunjukkan lagi

Kemas kini terakhir: 3 hari yang lalu • Dinaikkan pangkat

Lead Engineer, Manufacturing Process

Celestica Inc. • Kulim, Kedah, Malaysia

Select how often (in days) to receive an alert : .Lead Engineer, Manufacturing Process.Process Engineering Manufacturing. Senior Lead Engineer, Manufacturing Process.The Senior Lead Engineer, Manufact...Tunjukkan lagi

Kemas kini terakhir: 4 hari yang lalu • Dinaikkan pangkat

Senior Manufacturing Process Engineer — DFX, DOE & Yield

Celestica • Kulim, Kedah, Malaysia

A leading manufacturing company located in Kulim, Kedah is hiring a Senior Lead Engineer to manage process engineering for manufacturing. You will lead the design and optimization of processes, impl...Tunjukkan lagi

Kemas kini terakhir: 2 hari yang lalu • Dinaikkan pangkat

Manufacturing Engineer : Process Optimization & Validation

Boston Scientific • George Town, Penang, Malaysia

A global medical technology leader in Penang is seeking a Manufacturing Engineer to demonstrate technical expertise in process optimization and validation. The role requires 3-5 years of manufacturi...Tunjukkan lagi

Kemas kini terakhir: 2 hari yang lalu • Dinaikkan pangkat

ME Staff Engineer

Jabil • Bayan Lepas, Penang, Malaysia

Plans, directs, and coordinates the operations of productions, machinery, processing, and packaging departments.Recruit, interview and hire Manufacturing Supervisors and Group Leads.Communicate cri...Tunjukkan lagi

Kemas kini terakhir: 2 hari yang lalu • Dinaikkan pangkat

Mid / Senior Process Engineer (Molding / Laser Mark / Planarization)

Lumileds Malaysia Sdn Bhd • Bayan Lepas, Penang, Malaysia

Mid / Senior Process Engineer (Molding / Laser Mark / Planarization).Lumileds International is a global leader in LED technology, innovation, and solutions for the automotive, display, illumination, mo...Tunjukkan lagi

Kemas kini terakhir: 4 hari yang lalu • Dinaikkan pangkat

Manufacturing Process Engineer : Design & Optimization Lead

Celestica Inc. • Kulim, Kedah, Malaysia

A global technology firm in Kulim, Malaysia is seeking a Lead Engineer in Manufacturing Processes.You will design and implement new manufacturing processes, lead assessments of machine capability, ...Tunjukkan lagi

Kemas kini terakhir: 2 hari yang lalu • Dinaikkan pangkat

Firmware Engineer

OnLogic • Batu Kawan, Penang, MY

Quick Apply

As a Firmware Engineer at OnLogic you lead the development of firmware / software coding tasks for the various microcontroller (MCU) applications across our own products including motherboards and ex...Tunjukkan lagi

Kemas kini terakhir: 30+ hari yang lalu

Manufacturing Engineer : Process Improvement & Analytics

Jabil • Bayan Lepas, Penang, Malaysia

Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Ability to define problems, collect data, establish facts, an...Tunjukkan lagi

Kemas kini terakhir: 5 hari yang lalu • Dinaikkan pangkat

ME Sr Engineer

Jabil • Bayan Lepas, Penang, Malaysia

Leads the Process Engineering department in operating with a high level of efficiency, integrity, and enthusiasm.Essential Duties and Responsibilities. Strives to achieve excellence in all endeavors...Tunjukkan lagi

Kemas kini terakhir: 4 hari yang lalu • Dinaikkan pangkat

Senior / Development Engineer (SMT)

Lumileds • Bayan Lepas, Penang, Malaysia

Get AI-powered advice on this job and more exclusive features.Lumileds International is a global leader in LED technology, innovation, and solutions for the automotive, display, illumination, mobil...Tunjukkan lagi

Kemas kini terakhir: 2 hari yang lalu • Dinaikkan pangkat

Component Engineer

Jabil • Bayan Lepas, Penang, Malaysia

To be a technical focal point to the purchasing, project managers and design groups for alternate low cost, high quality components. To monitor and work problem component issues directly with the ma...Tunjukkan lagi

Kemas kini terakhir: 30+ hari yang lalu • Dinaikkan pangkat