This job offer is not available in your country.

CNC Turning Machinist

Ortho Solutions Sdn BhdButterworth, Pulau Pinang, Malaysia

12 hours ago

Job description

Perform all machining operations based on Set up sheet, Job router, Inspection Plan and QMS document in order to deliver quality products.

Ensure that the reqular maintenance is conducted in a planned and timely manner, provide all required work and maintenance reporting to superior in a timely and accurate manner.

Perform adjustment on insert or cutter by offsetting or change new cutter.

Perform first piece inspection after tool change for affected dimension.

Read and understand applicable document in order to measure the work piece as per expected measuring technique.

Able to operate multiple machines if the cycle time for each machine is long.

Responsible for keeping the machines and surrounding areas clean and tidy (5S) and working correctly on the shift basis.

Bar end / off cut / defect material must be disposed as per QMS requirements and it is not allow to keep in the bin of good product.

All tools, cutter, measurement equipment and material keep in the organized and proper area to prevent missing, damage and dropping or heavy scratches on the parts.

Follow work instruction from superior and able to complete the task on time. ( as per cycle time or target assigned)

Sets-up mills / lathes / wirecut by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; tramming heads.

Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

Protect and re-use used cutter in order to encourage cost saving and minimize wastage in the production.

Provide guidance and basic training to machine operator on machining knowledge and skill

Job Types : Full-time, Permanent

Pay : RM2, RM3,500.00 per month

Benefits :

Health insurance
Maternity leave
Opportunities for promotion
Parental leave
Professional development

Work Location : In person

Create a job alert for this search

Machinist • Butterworth, Pulau Pinang, Malaysia

Related jobs

Promoted

Programmer CNC (M Code | G Code) ID : 659861

PERSOLSeberang Perai, Penang, Malaysia

Reading and interpreting technical blueprints and design models.Develop CNC programs for laser cutting machines based on technical drawings or CAD files. Loading raw materials into the CNC machine.I...Show moreLast updated: 3 days ago

Promoted
New!

CNC Machinist

AdvantestBayan Lepas, Pulau Pinang, Malaysia

Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpre...Show moreLast updated: 12 hours ago

Promoted
New!

CNC Milling Machinist

K-Tool Engineering Sdn BhdBayan Lepas, Pulau Pinang, Malaysia

Set up, operate and maintain CNC mills to produce precision parts.Interpret technical drawings and CAD / CAM files.Select appropriate tooling, speeds and feeds for different materials.Perform quality...Show moreLast updated: 12 hours ago

Promoted
New!

CNC Programmer

RC Precision Engineering Sdn BhdPulau Pinang, Pulau Pinang, Malaysia

Reading and interpreting technical blueprints and design models.Adjust machine cutting paths or settings to optimize production while maintaining quality. Consider tools required to cut particular m...Show moreLast updated: 12 hours ago

Promoted

Asia Portfolio Leader (APL), Industrial Specialties Division Packaging, Safety & Industrial Bus[...]

3MSungai Petani, Kedah, Malaysia

The area portfolio leader for Asia ISD Packaging will be responsible for driving growth and profitability of the packaging tapes business in Asia through area product marketing leadership role.The ...Show moreLast updated: 3 days ago

Promoted
New!

CNC Machinist

Ferrotec Manufacturing MalaysiaPulau Pinang, Pulau Pinang, Malaysia

This is a full-time, on-site role for a CNC Machinist located in Kulim, Kedah, Malaysia.The CNC Machinist is responsible for setting up, operating, and maintaining CNC machines to produce precision...Show moreLast updated: 12 hours ago

Promoted
New!

Senior Machinist

KMWE Malaysia Sdn BhdPulau Pinang, Pulau Pinang, Malaysia

Set up and operate 3-axis, 4-axis or 5-axis CNC milling machines according to procedures, programs and engineering drawings to manufacture machined parts efficiently and to technical specifications...Show moreLast updated: 12 hours ago

Promoted
New!

EDM Wirecut Machinist

Mechmodule Technology Sdn BhdBatu Kawan, Pulau Pinang, Malaysia

Programming and setting of Wirecut;.Perform dimensional and geometric measurement on parts;.Uphold high accuracy specification and quality work production at all times. .Responsible to carry out wor...Show moreLast updated: 12 hours ago

Promoted
New!

senior cnc machinist

UIS TECHNOLOGIES SDN BHDSimpang Empat, Pulau Pinang, Malaysia

CNC programming to meet tolerance control requirement.Responsible for machining of parts for machines, equipment and tooling. Responsible to operate / set-up of CNC machine.Able to understand basic ...Show moreLast updated: 12 hours ago

Promoted
New!

Engineering Machinist

Ascentec Engineering Sdn BhdButterworth, Pulau Pinang, Malaysia

Machine set-up and operation of complex and quick turn prototype and production parts with minimal supervision ensuring parts conform to specifications and requirements. Leading machine setup / operat...Show moreLast updated: 12 hours ago

Promoted
New!

Senior CNC CAM Programmer

KMWE Malaysia Sdn BhdPulau Pinang, Pulau Pinang, Malaysia

Lead the CAM Programming department in developing, editing, revising and documenting manufacturing methods and CNC (CAM) programs from various engineering media for high precision 3-axis, 4-axis an...Show moreLast updated: 12 hours ago

Promoted
New!

Machine Setter

Grand Venture Technology Sdn BhdSimpang Empat, Perak, Malaysia

Monitor machine operation to adjust feed, maintain temperature, and identify defects.Review samples, drawings, or instructions to understand output specifications. Check output for consistency with ...Show moreLast updated: 12 hours ago

Promoted

CNC Machinist

APRPMSeberang Perai, Penang, Malaysia

This company is a portfolio medical technology business focused on the repair, regeneration and replacement of soft and hard tissue. Development opportunities working with industry experts.Opportuni...Show moreLast updated: 1 day ago

Promoted
New!

Trainee CNC Machinist

Shinsei Industry Sdn BhdDaerah Kerian, Perak, Malaysia

Learn to read and interpret engineering drawings, blueprints, and technical documents.Understand machining processes, materials, and tolerances. Familiarize with CNC machine tools (lathe, turning, e...Show moreLast updated: 12 hours ago

Promoted
New!

cnc machinist-fanuc controller

LW SYS industries Sdn BhdNibong Tebal, Pulau Pinang, Malaysia

To operate CNC Machining programs and process in accordance with drawing and specifications.Perform preventive maintenance activities as scheduled to ensure equipment reliability.Inspect finished p...Show moreLast updated: 12 hours ago

Promoted

Machinist (EDM / Wire Cut / EDW)

Mehow Medical (M) Sdn BhdSimpang Ampat, Penang, Malaysia

Mehow Medical (M) Sdn Bhd – Bukit Tambun, Penang.Operate EDM processing according to safety standard operating procedure and drawings tolerance. Responsible for regular inspection / preservation / maint...Show moreLast updated: 1 day ago

Promoted
New!

CNC Machinist

Lifework HR Services Sdn BhdBayan Lepas, Pulau Pinang, Malaysia

We are looking for a skilled CNC Machinist to join our team.Read technical drawings & manuals.Has working experience as Machinist and able to do programming. Has a strong technical skills and intere...Show moreLast updated: 12 hours ago

Promoted
New!

cnc technician / machinist

Lvio Precision Sdn BhdNibong Tebal, Pulau Pinang, Malaysia

Setup CNC machine for production runs, including loading CNC program, select appropriate cutting tools and adjust machine parameters to meet production requirements. Setup of x / y / z datum for each pi...Show moreLast updated: 12 hours ago